Spring plunger also has a technical nomenclature SLD (spring-loaded device). It is a device that is narrow and small. It finds its application in areas where indexing and positioning of a component have to be done.
After installation, it tends to apply the required pressure so that the nose or ball (in its end) is remained accurately positioned. There are a variety of spring plungers available in the market. The common types are standard size and metric spring plungers.
Working of a spring plunger
As per the name suggests, spring plunger works by applying spring force. The spring force helps the ball at the rear end positioned the same at all times. In fact, no matter how much force is applied upon it, it remains intact in its position.
Therefore, the primary work area of spring plungers (whether they are standard or metric spring plungers is to lock the component in its place. Depending upon the pressure they exert, they come in three varieties like light, standard and heavy force producing plungers.
Design of a spring plunger
Spring plungers, whether metric or standard, all have the same design. There are three essential components, including a spring for internal compression, threaded body, and plunger.
The threaded body is the housing in which spring resides. On the tip of spring, resides the plunger, which manages the accurate force to be applied. This design is the simplest of all varieties of plungers that finds its use in manufacturing industries.
Benefits of using spring plungers
- Easier to install
- Simple design
- Highly precise for repeatable forces
- Inexpensive
- Ease of using
So, in case if you have been looking for good quality metric spring plungers with the above benefits, then Techni-Tool Products are the only name. They have relatively good quality plungers in all variety and sizes.
techni-toolproducts.com 